Arts Encaustic Online Catalog Shop Tools & Attachments

Items Ordered:, Cart Value:

Product Catalog Shop > Encaustic Art Supplies > Tools & Attachments

Ref: 5301.00

The ideal iron for Encaustic Art - Smooth Base (no teflon) and a high quality temperature control gives you a STABLE LOW-TEMPERATURE. Packs flat and can be used as a small hotplate palette too! Works worldwide - Dual voltage 120v ~ 120w 60Hz / 240v ~ 240w 50Hz - (comes fitted with a British 3 pin plug if supplied through this online service). This iron is a great tool for creative waxart! [570 gms]

USA residents - to buy a UL approved Iron (USA Std) you need to forget this site and any items chosen so far and change to ordering from the USA site at www.encausticart.us

... more about the iron

Price: £16.98 (£19.95 Including VAT at 17.5%)
`

Quantity:

ELECTRIC PLUG TYPE

British 3 pin plug

Euro 2 pin plug

Low Heat Stylus Tool

Ref: 5305.00

This electrically powered low heat tool will enable detailed graphics with the wax colours. It can operate on both 110/120v and 220/240v systems provided your local plug type is correctly fitted. It comes complete with 2 x Drawing Tips (Ref#99530600) and 1 x Wire Brush head (Ref#99530700)
Other tips available are:
Mini Iron Tip # 99530800
Mini MicroTip # 99530900
Round Tip # 99531100

USA residents - order from the USA site at www.encausticart.us

This tool will make a diference to your work!
...more about the stylus
[260 gms]

Price: £21.23 (£24.95 Including VAT at 17.5%)
`

Quantity:

ELECTRIC PLUG TYPE

British 3 pin plug

Euro 2 pin plug

Stylus Tip - DRAWING TIP

Ref: 5306.00

A split tip that works like a "line pen". Fit into the Stylus and tighten the retaining screw. Ideal for all drawn lines, graphic work, careful blending and shading, etc. Note: if this tip is too sharp use a fine abrasive / sand paper to perfectly smooth the tip to suit your style and action of drawing.
[4 gms]
... more on the drawing tip

Price: £1.66 (£1.95 Including VAT at 17.5%)
`

Quantity:

Stylus Tip - WIRE BRUSH HEAD

Ref: 5307.00

A coated copper wire brush head that is used heated. Fit into the Stylus and tighten the retaining screw. These metal fibres are fragile so be kind to them and do not "stab" into the wax colours. the fibres will bend if pressed too hard during use. they can easily be bent back. To clean use a cheap candle, fill the heated brush head with clear wax and pinch the fibres between a tissue. Always pull the tissue gently along the metal fibres from the Stylus unit towards the tip. Once tangled it is hard to repair! [6 gms]
... more on the brush head

Price: £1.66 (£1.95 Including VAT at 17.5%)
`

Quantity:

Stylus Tip - MINI IRON TIP

Ref: 5308.00

A triangular head about 35mm (1.25") long. Fit into the Stylus and tighten the retaining screw. Ideal for miniatures and working in small areas (not recommended for larger sweeping strokes because the bigger surface area of this tip loses heat quickly in such applications). Great for adding areas of pattern "inside" larger artworks, etc.
[12 gms]
... more on the mini iron

Price: £2.98 (£3.50 Including VAT at 17.5%)
`

Quantity:

Stylus Tip - MICRO IRON TIP

Ref: 5309.00

A small iron shaped tip about the size of a fingernail. Fit into the Stylus and tighten the retaining screw. A very useful tip that can be utilised in many ways. It behaves much like the end of a small palette knife. Excellent for patterning, working "inside" aan image, etc A worthy addition to your tools. The flat base is made from thin aluminium and can be re-shaped using a metal file to modify and create your own tips!
[8 gms]
... more on the micro iron

Price: £2.51 (£2.95 Including VAT at 17.5%)
`

Quantity:

Stylus Tip - ROUND 20mm TIP

Ref: 5311.00

A round tip 20mm in diameter that fits into the Stylus.
[4 gms]
... more on the stylus tips

Price: £2.98 (£3.50 Including VAT at 17.5%)
`

Quantity:

Metal SCRIBING Tool

Ref: 5310.15

A double ended brass tool for scraping and scratching the wax colours (approximately 115mm (4.5") long. One end is a pointed round bar - useful for inscribing and detailed graphics and scratching fine lines through the wax. The other end has a long and short bladed form - good for scraping off larger amounts and areas of wax. [26 gms]

Price: £1.66 (£1.95 Including VAT at 17.5%)
`

Quantity:

A2 Hotplate - The Ultimate

Ref: 99530300

Hotplate user introduction - printable PDF
The Ultimate Hotplate Control at an A2 size. This is the high quality heat controllable tool that opens a whole new world for Encaustic Art.
For further information click here

Price: £165.96 (£195.00 Including VAT at 17.5%)
`

Quantity:

5 x Scrapy Wax Mover Set

Ref: 99531500

SCRAPY WAX MOVERS
Use these rubber style tipped tools to move molten wax around, to create marks and textures. Great for Hotplate and Hot Air techniques. Also for application of glue in scrap booking, cardmaking or fidldy places. These can also be used with any liquids, paints, or even modelliing materials for making marks, etc. [90gms]

Price: £10.20 (£11.99 Including VAT at 17.5%)
`

Quantity:

4 x Sponge Set

Ref: 99600000

Sponges for wax Art
Use these sponges to move and texture molten wax colour.
Great for Hotplate and Hot Air techniques.
[90gms]

Price: £2.54 (£2.98 Including VAT at 17.5%)
`

Quantity:

5 Hogs Hair Brush Pack

Ref: 5340.00

Special Promotion Save 15%,
£5.95 instead of £7.00
Use these natural hair brushes (non-heated) with molten wax. Sizes in the pack are 2mm / 4mm / 8mm / 12mm & 20mm .
The Painting Iron (Ref #5301.00) can be set up as a small Hot Plate / heated palette where waxes can be mixed, etc. Also consider using a Heated Plate Warmer / food warming tray (domestic appliance) as an excellent heat source for keeping waxes molten. Use a multi-dished muffin tin to contain your wax colours.
[60 gms]

Price: £5.96 (£7.00 Including VAT at 17.5%)
`

Quantity:

Hot Air Gun Information

Ref: 99530400

We do not actually have a particular Hot Air Gun tool for sale. For further information click here

`

Product Catalog Shop > Encaustic Art Supplies > Tools & Attachments

Best Sellers